gaas sp2t absorptive switch with asic driver, dc - 3.0 ghz rev. v3 masw - 007072 - 000100 1 1 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 1 features ? typical isolation: 30 db (2,000 mhz) ? typical insertion loss: .75 db (2,000 mhz) ? asic ttl/cmos driver ? low dc power consumption ? 50 ohm nominal impedance ? tape and reel packaging available ? test boards available ? lead - free soic - 16 package ? 100% matte tin plating over copper ? halogen - free green mold compound ? 260c reflow compatible ? rohs* compliant version of sw65 - 0313 description m/a - com's masw - 007072 - 000100 is a gaas mmic absorptive sp2t switch with an integral silicon asic driver. this device is in a 16 - lead plastic package. this switch offers excellent broadband performance and repeatability from dc to 3 ghz, while maintaining low dc power dissipation. the masw - 007072 - 000100 is ideally suited for wireless infrastructure applications. also available in a ceramic package with improved performance. ordering information part number package masw - 007072 - 000100 bulk packaging masw - 007072 - 0001tr 1000 piece reel masw - 007072 - 0001tb sample test board note: reference application note m513 for reel size information. functional schematic pin configuration 1 pin no. function pin no. function 1 v ee 9 rfc 2 gnd 10 gnd 3 gnd 11 rf1 4 nc 12 gnd 5 gnd 13 nc 6 rf2 14 gnd 7 gnd 15 v cc 8 gnd 16 c1 * restrictions on hazardous substances, european union directive 2002/95/ec. 1. nc = no connection vee gnd gnd nc gnd rf 2 c 1 vcc gnd nc gnd rf 1 gnd rfc gnd gnd
gaas sp2t absorptive switch with asic driver, dc - 3.0 ghz rev. v3 masw - 007072 - 000100 2 2 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 2 electrical specifications: t a = 25 c, z 0 = 50 ? parameter test conditions units min typ max insertion loss dc - 1.0 ghz dc - 2.0 ghz dc - 3.0 ghz db db db 0.6 0.75 1.2 0.75 0.90 1.45 isolation (all arms off) dc - 1.0 ghz dc - 2.0 ghz dc - 3.0 ghz db db db 35 27 21 38 30 24 vswr dc - 1.0 ghz dc - 2.0 ghz dc - 3.0 ghz 1.2:1 1.3:1 1.7:1 1.3:1 1.4:1 1.9:1 t rise t fall t on t off transients 10%/90%, 90%/10% 2 50% ttl to 90%/10% rf in - band (peak to peak) ns ns mv 15 50 50 50 150 150 1 db compression .05 ghz .5 - 3.0 ghz dbm dbm +25 +30 input ip 3 two tone inputs 0.05 ghz up to +5 dbm 0.5 - 3.0 ghz dbm dbm +40 +46 v cc v +4.5 +5.0 5.5 v ee v - 8.0 - 5.0 - 4.75 v il v ih low - level input voltage high - level input voltage v v 0.0 2.0 0.8 5.0 lin (input leakage current) vin = v cc or gnd ua - 1.0 1.0 icc (quiescent supply current) vcntrl = v cc or gnd ua 250 400 icc (additional supply current per ttl input pin) v cc = max, vcntrl = v cc - 2.1 v ma 1.0 i ee v ee min to max, vin = v il or v ih ma - 1.0 - 0.2 2. decoupling capacitors (.01 f) are required on the power supply lines.
gaas sp2t absorptive switch with asic driver, dc - 3.0 ghz rev. v3 masw - 007072 - 000100 3 3 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 3 absolute maximum ratings 3,4 parameter absolute maximum max. input power 0.05 ghz 0.5 - 3.0 ghz 5 +27 dbm +34 dbm v cc - 0.5v v cc +7.0v v ee - 8.5v v ee +0.5v v cc - v ee - 0.5v v cc - v ee 14.5v vin 6 - 0.5v vin v cc + 0.5v operating temperature - 40oc to +85oc storage temperature - 65oc to +125oc 3. exceeding any one or combination of these limits may cause permanent damage to this device. 4. m/a - com does not recommend sustained operation near these survivability limits. 5. when the rf input is applied to the terminated port, the abso- lute maximum power is +30 dbm. 6. standard cmos ttl interface, latch - up will occur if logic sig- nal is applied prior to power supply. recommended pcb configuration handling procedures please observe the following precautions to avoid damage: static sensitivity gallium arsenide integrated circuits are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these devices. truth table (switch ) c1 rf1 rf2 0 on off 1 off on 0 = ttl low; 1 = ttl high
gaas sp2t absorptive switch with asic driver, dc - 3.0 ghz rev. v3 masw - 007072 - 000100 4 4 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 4 typical vswr typical isolation (db) typical performance curves typical insertion loss (db) 0.0 0.5 1.0 1.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 fre que ncy (ghz ) loss (db) +2 5c +8 5c - 4 0 c 1.0 1.2 1.4 1.6 1.8 2.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 fre que ncy (ghz ) vswr (db) of f on 20 30 40 50 60 70 80 0.0 0.5 1.0 1.5 2.0 2.5 3.0 fre que ncy (ghz ) isolation (db)
gaas sp2t absorptive switch with asic driver, dc - 3.0 ghz rev. v3 masw - 007072 - 000100 5 5 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 5 lead - free, soic - 16 ? ? reference application note m538 for lead - free solder reflow recommendations.
gaas sp2t absorptive switch with asic driver, dc - 3.0 ghz rev. v3 masw - 007072 - 000100 6 6 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 6 m/a - com technology solutions inc. all rights reserved. information in this document is provided in connection with m/a - com technology solutions inc ("macom") products. these materials are provided by macom as a service to its customers and may be used for informational purposes only. except as provided in macom's terms and conditions of sale for such products or in any separate agreement related to this document, macom assumes no liability whatsoever. macom assumes no responsibility for errors or omissions in these materials. macom may make changes to specifications and product descriptions at any time, without notice. macom makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. no license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. these materials are provided "as is" without warranty of any kind, either express or implied, relating to sale and/or use of macom products including liability or warranties relating to fitness for a particular purpose, consequential or incidental damages, merchantability, or infringement of any patent, copyright or other intellectual property right. macom further does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these materials. macom shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. macom products are not intended for use in medical, lifesaving or life sustaining applications. macom customers using or selling macom products for use in such applications do so at their own risk and agree to fully indemnify macom for any damages resulting from such improper use or sale.
|
